Colored zircon rings
Colored zircon rings
Couldn't load pickup availability
specifications
Thickness: 1.0cm (manual measurement, there may be a slight error in the specification and weight of the actual goods, please refer to the actual weight)
Material: copper electroplating 18k genuine gold +AAA zircon
|
The no |
4 | 5 | 6 | 7 | 8 |
|---|---|---|---|---|---|
| The perimeter | 46.8 | 49.4 | 52 | 54.5 | 57.2 |
|
The diameter of |
14.8 | 15.7 | 16.5 | 17.3 | 18.2 |
| unit：mm |
Ring size selection port code comparison table
Measurement steps:
Preparation tools: inelastic rope or strip, tape or ruler;
Wrap the rope around the part of the ring and tighten it as much as you want to wear it, keeping the rope straight.
Use a thinner marker to mark the junction.
Recording accuracy to millimeter;
It is recommended to measure more than three times and take the average value.
Notes:
Manual measurement error, suggested to the physical jewelry store measurement;
Avoid cold measurements, which are smaller than usual;
The measurement results are usually listed below. If they are not within the scope, it is recommended to re-measure or go to the jewelry store for measurement
